The top cap has an exterior diameter of 22mm guaranteeing a nice flush fit with numerous RDAs and tanks on the market. We’ve tested it with our Nucleus and were pleasantly surprised with the mod’s performance. Almost no voltage drop, solid performance and excellent flavor. It’s an ideal mechanical mod for both beginners and experienced vapers that sells at around the $50 tag.
Approximately 11.45cm long with both tubes connected, the UDT V12 + is one of Youde’s updated versions of the very popular mechanical mod that’s looking hotter than ever. If you’re familiar with the initial UDT V12 then you know it had a few problems with the locking mechanism because you needed to twist it multiple times before you could start puffing on the device. With the UDT V12+ they’ve managed to fix those problems and changed the color from a combination of stainless steel and brass to only a sleek stainless steel finish.
The UDT V12 + is a telescopic, purely mechanical mod with a unique design built for great handling that can accommodate a 18350 battery with the small extension tube and a large 18650 with the bigger tube. It comes packed in a nice cardboard gift box with a transparent film right in front of the mod, making it clearly visible. Inside the box, you will find a user manual and the mod itself without any extra accessories. The mod is made up of five distinctive parts: the top cap, the 18350 tube, the 18650 tube, the beauty ring, and the bottom cap that includes the spring-loaded firing pin.
The top cap has three airflow channels engraved on the top part so you will be able to enjoy the full potential of any 510 atomizer or tank you might use. The center pin is adjustable inside the socked and also it has a retractable positive battery connector that can be adjusted to fit your 18650 perfectly. The pins are probably silver coated and with this move, Youde managed to solve some of the voltage drop problems its older mechanical mods experienced in the past.
On the bottom cap, you will notice the new and improved firing button that feels very good when pressed and it’s pretty clear to see the upgrade from the previous version. The locking mechanism works perfectly now but we have a few concerns about this mod firing under its own weight in 18650 mode. The engraved scorpion logo ads a stylish mark on the mod and paired with the awesome designed it’s surely the type of device that will get you noticed. The UDT V12 also comes with four vent holes so that you don’t have to worry about your battery overheating.
The top cap has an exterior diameter of 22mm guaranteeing a nice flush fit with numerous RDAs and tanks on the market. We’ve tested it with our Nucleus and were pleasantly surprised with the mod’s performance. Almost no voltage drop, solid performance and excellent flavor. It’s an ideal mechanical mod for both beginners and experienced vapers that sells at around the $50 tag.
